BenQ W5000 User Manual - Page 6

W20000-en.book Page 6 Monday, October 22, 2007 3:35 PM English Overview Shipping contents The projector is shipped with the cables required for connection to video equipment. Some of the items may not be available depending on your region of purchase. Please check with your place of purchase. Some of the accessories may vary from region to region. The warranty card and safety manual are only supplied in some specific regions. Please consult your dealer for detailed information. W20000 (CHINA) (EU) (UK) (US) (3-2 power adaptor) W20000 W5000 Projector Power cable Component Video cable Remote control Batteries User manual Dust filter Remote control batteries 1. To open the battery cover, turn the remote control over to view its back, push on the finger grip on the cover and slide it down in the direction of the arrow as illustrated. The cover will slide off. 2. Remove any existing batteries (if necessary) and install two new AAA batteries observing the battery polarities as indicated in the base of the battery compartment. Positive (+) goes to positive and negative(-) goes to negative. 3. Refit the cover by aligning it with the case and sliding it back up into position. Stop when it clicks into place. Notes on handling batteries • Do not mix old batteries with new ones, or mix different types of batteries. • Avoid leaving the remote control and batteries in an excessive heat or humid environment like the kitchen, bathroom, sauna, sunroom, or in a closed car. • Dispose of used batteries according to the battery manufacturer's instructions and local environment regulations for your region. • If the remote control will not be used for an extended period of time, remove the batteries to avoid damage to the control from possible battery leakage. Remote control operation • Make sure that there is nothing positioned between the remote control and the infrared (IR) sensor on the projector that might obstruct the IR beam from the remote control reaching the projector. up to 8m • The effective range of the remote control is up to 8 meters, and at an angle within 45 degrees of the IR beam. Always aim straight at the projector, however most screens will also reflect the IR beam to the projector. 6 Overview