BenQ XR3501 XR3501 User Manual - Page 12

How to change cable connection after initial installation To protect the curved screen, do not lay the screen face down on the desk without the protection of the supplied cushion. If you prefer to change the cable connection after the initial installation has been completed in How to assemble your monitor hardware on page 9, follow the procedures below. 1. Turn off the monitor. Turn off the monitor and the power before unplugging the power cable. Turn off the computer before unplugging the monitor signal cable. 2. Tilt the monitor to its extended position. Gently tilt the monitor to the maximum extended position. To properly tilt the monitor, see Tilt the monitor. on page 11. 3. Remove the back cover. Remove the back cover from its bottom as illustrated. Follow the instructions in Connect the PC video cable. on page 9 and change connected cables. Re-install the back cover as instructed in Install the back cover. on page 10. 12 How to change cable connection after initial installation