Beretta U22 Neos Beretta U22 Neos User Manual - Page 24

Unloading The Pistol And Firing Chamber

Get Beretta U22 Neos PDF manuals and user guides View all Beretta U22 Neos manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

• To adjust the sight for windage (left or right) turn the windage screw counterclockwise to move the point of impact to the right, turn clockwise to move the point of impact to the left. (Fig. 20) UNLOADING THE PISTOL and FIRING CHAMBER • Engage the manual safety, by pushing the safety lever downward so as to cover the red warning dot. (Fig. 4) • Depress the magazine button and remove the magazine from the pistol. (Fig. 9) • Pull the slide back to eject the round in the chamber. WARNING: Always inspect the firing chamber to ensure that it is empty. The chamber is empty when no cartridge is visible when looking into the open chamber. (Fig. 3) • When you are sure the chamber is empty and the cartridge has been ejected, release the slide. • Unload the magazine following the instructions in the UNLOADING THE MAGAZINE section of this manual. • Re-insert the empty magazine. WARNING: Releasing a fully retracted slide when a loaded magazine is in the pistol will feed a cartridge into the pistol's firing chamber. The pistol can then be fired. NOTICE: To increase the service life of the firing pin spring, it is advisable not to store the pistol with the firing pin cocking indicator in the cocked position. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
26
• To adjust the sight for windage (left or right) turn the windage screw counterclockwise to move the
point of impact to the right, turn clockwise to move the point of impact to the left. (Fig. 20)
UNLOADING THE PISTOL and FIRING CHAMBER
• Engage the manual safety, by pushing the safety lever downward so as to cover the red warning
dot. (Fig. 4)
• Depress the magazine button and remove the magazine from the pistol. (Fig. 9)
• Pull the slide back to eject the round in the chamber.
WARNING:
Always inspect the
fi
ring chamber to ensure that it is empty. The chamber is empty
when no cartridge is visible when looking into the open chamber. (Fig. 3)
• When you are sure the chamber is empty and the cartridge has been ejected, release the slide.
• Unload the magazine following the instructions in the UNLOADING THE MAGAZINE section of
this manual.
• Re-insert the empty magazine.
WARNING:
Releasing a fully retracted slide when a loaded magazine is in the pistol will feed
a cartridge into the pistol’s
fi
ring chamber. The pistol can then be
fi
red.
NOTICE:
To increase the service life of the
fi
ring pin spring, it is advisable not to store the
pistol with the
fi
ring pin cocking indicator in the cocked position.