Beretta U22 Neos Beretta U22 Neos User Manual - Page 27

Maintenance

Get Beretta U22 Neos PDF manuals and user guides View all Beretta U22 Neos manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

You will feel spring resistance. Compress the spring completely. This will release the rear sight blade, which can then be lifted out of its seat. (Fig. 25) To replace the rear sight blade, follow the procedure in reverse. Be sure to insert the left side of the blade (the one with the round "hook" shape) in first. (Fig. 26) MAINTENANCE Clean and lubricate the pistol every day it is fired or at least once a month. FIELD STRIPPING WARNING: Make sure the pistol is unloaded. If not, unload it following the procedure in the UNLOADING THE PISTOL and FIRING CHAMBER section in this manual. NOTICE: Carry out field-stripping and the assembly operations over a table to catch components should they drop. • Remove the magazine by depressing the magazine release button. (Fig. 9) • Pull the slide back and visually check to ensure there is no round in the chamber. (Fig. 3) • If there is a round in the chamber, eject it by retracting the slide rearward until the slide stops and the cartridge is ejected. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
29
You will feel spring resistance. Compress the spring completely. This will release the rear sight blade,
which can then be lifted out of its seat. (Fig. 25)
To replace the rear sight blade, follow the procedure in reverse. Be sure to insert the left side of the
blade (the one with the round “hook” shape) in
fi
rst. (Fig. 26)
MAINTENANCE
Clean and lubricate the pistol every day it is
fi
red or at least once a month.
FIELD STRIPPING
WARNING:
Make sure the pistol is unloaded. If not, unload it following the procedure in the
UNLOADING THE PISTOL and FIRING CHAMBER section in this manual.
NOTICE:
Carry out
fi
eld-stripping and the assembly operations over a table to catch compo-
nents should they drop.
• Remove the magazine by depressing the magazine release button. (Fig. 9)
• Pull the slide back and visually check to ensure there is no round in the chamber. (Fig. 3)
• If there is a round in the chamber, eject it by retracting the slide rearward until the slide stops
and the cartridge is ejected.