Beretta U22 Neos Beretta U22 Neos User Manual - Page 25

Special Dlx Instructions - trigger adjustment

Get Beretta U22 Neos PDF manuals and user guides View all Beretta U22 Neos manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

UNLOADING THE MAGAZINE • To unload the magazine, grasp it with one hand around the magazine box, bottom down and front end forward. Press the follower button to partially depress the magazine spring. Push the top cartridge forward and out of the magazine lips. • Repeat until the magazine is empty. SPECIAL DLX INSTRUCTIONS TRIGGER ADJUSTMENT NOTICE: The trigger pull weight is pre-set at the Beretta factory and is not adjustable. Adjusting the pre and overtravel of the trigger will NOT change the trigger pull weight. WARNING: Make sure that the pistol is unloaded. If not, unload it following the procedure in the UNLOADING THE PISTOL and FIRING CHAMBER section of the U22 Neos Instruction Manual. OVERTRAVEL • Trigger overtravel is the rearward distance traveled by the trigger after sear release. Overtravel adjustment of the U22 Neos DLX is accomplished by turning the trigger overtravel screw using the supplied, 1.5 mm, hex key. (Fig. 21) Turning the screw clockwise will reduce overtravel, while turning the screw counterclockwise will increase overtravel. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
27
UNLOADING THE MAGAZINE
• To unload the magazine, grasp it with one hand around the magazine box, bottom down and
front end forward. Press the follower button to partially depress the magazine spring. Push the
top cartridge forward and out of the magazine lips.
• Repeat until the magazine is empty.
SPECIAL DLX INSTRUCTIONS
TRIGGER ADJUSTMENT
NOTICE:
The trigger pull weight is pre-set at the Beretta factory and is not adjustable. Adjusting
the pre and overtravel of the trigger will NOT change the trigger pull weight.
WARNING:
Make sure that the pistol is unloaded. If not, unload it following the procedure in the
UNLOADING THE PISTOL and FIRING CHAMBER section of the U22 Neos Instruction Manual.
OVERTRAVEL
•
Trigger overtravel is the rearward distance traveled by the trigger after sear release. Overtravel
adjustment of the U22 Neos DLX is accomplished by turning the trigger overtravel screw using
the supplied, 1.5 mm, hex key. (Fig. 21) Turning the screw clockwise will reduce overtravel,
while turning the screw counterclockwise will increase overtravel.