Bernina 1011 Manual - Page 12

Bobbin case and bobbin, winding lower thread Removing the bobbin Case Set the over switch to the IM positron Check that the needle is raised. open the hinged front cover on the free arm (Fig. 1). WARNING: Please Fete, to rt, safety Instru-ct an s Will the index finger and thumb of the left hand. pull the bobbin case latch forward and remove the bobbin case (Fig 2) •1 Winding lower thread tt boodle on Ile sp nate and press it lo the right against the bobbin yonder stop The Wet •I winder is now eirgag. ! Take thread from the i. • of thread on the thic....1 holder pn and pass r clockwise around the F•e- tension stud to the empty bobbin. Wind around the empty bobbin several times, again in a clock. vase direction (Fig 4). When removing the bObbin, cut the thread by pulling it to the len against the bobbin winder stop (Fig. 5) Press on the loot control to start the motor. When the bobbin is full, the bobbin winder will stop automatically. Push bob- bin to left And remove.