Binatone B430 User Manual - Page 38

NAVIGATION MENU Volume Tap to change the volume of the unit. Use the Left/Right arrows to change the level, the current level will be indicated on the bar. Tapping Default will reset the volume back to the default state. Tapping cancel will exit without saving any of the changes you have made. Tapping Done will save any changes and exit. About Displays information about the software version which you are using. Tap Close to return to the settings menu. Note: In order for the changes to the settings to be saved, you must exit the navigational software correctly by pressing on the exit icon shown on the main menu screen. (See page 16) GPS Status This screen can be brought up from several different points in the software, by either tapping in the main menu or from the map screen. It can also be found as an option in the Navigation Options menu. The screen shows you information about the date/time, your current position in longitude and latitude as well as your height above sea level. Your current speed and the direction you are facing. Along with this information you will find information about the satellites you are receiving signals from. The green bars show signals which are locked, the orange bars show the signals which have been found but are not locked to. Next to these bars you will see a number this number relates to the number of the satellite for which the signal is coming from. Tap Close to return to the Main Menu. Note; If you only have 3 locked satellite signals then you only have a 2D fix and certain information will not be available. In order to navigate you need at least 4 locked satellite signals which will give a 3D fix. This is clearly indicated at the bottom of the screen by either the word Invalid or valid 37 Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)