Biostar I945G-M7 Setup Manual - Page 54
On-Chip Serial ATA
View all Biostar I945G-M7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
945G-M7 & 945P-M7 BIOS SETUP On-Chip Serial ATA This item allows you to choose: Disabled: disabled SATA Controller Combined Mode: PATA and SATA are combined max of 2 IDE drivers in each channel. Enhanced Mode: enabled both SATA and PATA max of 6 IDE drivers are supported. SATA Only: SATA is operating in legacy mode. The Choices: Default (default), Auto, Combined Mode, Enhanced Mode, and SATA only. SATA PORT Speed Settings The Choices: Disabled (default), Enabled. PATA IDE Mode The Choices: Primary (default). 22
945G-M7 & 945P-M7 BIOS SETUP
22
On-Chip Serial ATA
This item allows you to choose:
Disabled:
disabled SATA Controller
Combined Mode:
PATA and SATA are combined max of 2 IDE drivers
in each channel.
Enhanced Mode:
enabled both SATA and PATA max of 6 IDE drivers
are supported.
SATA Only:
SATA is operating in legacy mode.
The Choices: Default
(default), Auto, Combined Mode, Enhanced Mode,
and SATA only.
SATA
PORT Speed Settings
The Choices: Disabled
(default), Enabled.
PATA
IDE Mode
The Choices: Primary
(default).