Biostar IDEQ 330P MANUAL - Page 11

Power Source Headers for USB Ports: 1394_USBV5/LAN_USBV3 31 Pin 1-2 close 31 Pin 2-3 close Assignment +5V +5V standby Voltage Description 1394_USBV5: +5V for USB ports at J1394_USB1. (Default) LAN_USBV3: +5V for USB ports at and JUSBLAN1. (Default) J1394_USBV1: USB ports at J1394_USB1 are powered with +5V standby voltage. JUSBV1: USB ports at JUSBLAN1 are powered with +5V standby voltage. Note: In order to support this function "Power-on system via USB device," "J1394_USBV5/LAN_USBV3" jumper cap should be placed on Pin 2-3 individually. Power Source Header for PS/2 Keyboard and Mouse: JKBMSV1 Assignment Description 1 +5V Pin 1-2 close 3 +5V for keyboard and mouse (Default) 1 +5V standby Pin 2-3 close Voltage 3 PS/2 keyboard and mouse are powered with +5V standby voltage. Note: In order to support this function "Power-on system via keyboard and mouse", "JKBMSV1" jumper cap should be placed on Pin 2-3. CD-ROM Audio-in Connector: JCDIN1 This connector allows user to connect the audio source from the variety devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.. JCDIN1 4 1 Pin Assignment 1 Left channel input 2 Ground 3 Ground 4 Right channel input Power Source Header for 1394 Chip: J1394PWR1 Assignment 1 +3.3V Pin 1-2 close 3 Description +3.3V for 1394 chipset. (Default) 1 Pin 2-3 close +3.3V SB 3 +3.3V SB for 1394 chipset. Header for Audio 1394 Ports at Front Panel: FIO1 20 Pin 1~10 11~20 1394 Header Audio Control Power Header for Front Panel: FIO2 2 1 FIO 1 Assignment Pin 1~10 11~20 21~28 1 Power Control IR Control USB Header 27 28 FIO2 Assignment Headers for USB 2.0 Ports at Front Panel: FIO3/FIO4 9 2 10 Pin Assignment 1 Key 3 Ground 5 USB+ 7 USB9 +5V(fused) Pin Assignment 2 NC 4 Ground 6 USB+ 8 USB10 +5V(fused) Caution: To function FIO1,3,4 headers, they should be connected onto FIO1S1.