Biostar IDEQ 330P MANUAL - Page 12

Power Source Header for FIO3/4: FIO_USBV1 Assignment 3 +5V Pin 1-2 close 1 Description +5V for FIO3/4 (Default) 3 Pin 2-3 close +5V standby Voltage FIO3/4 powered with standby voltage of 5V 1 Note: In order to support this function "Power-on system via USB device," "FIO_USBV1" jumper cap should be placed on Pin 2-3 individually. Close CMOS Header: JCMOS1 By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. JCMOS1 1 Pin 1-2 close 3 1 Pin 2-3 close 3 Assignment Normal Oaration (Default). Clear CMOS data. Clear CMOS Procedures: 1. Remove AC power line. 2. Set the jumper to "Pin 2-3 close". 3. Wait for five seconds. 4. Set the jumper to "Pin 1-2 close". 5. Power on the AC. 6. Reset your desired password or clear the CMOS data.