Biostar MCP6P3 Bios Setup - Page 28
HPET Support, POWER ON Function, KB Power ON Password, Hot Key Power ON, PWRON After PWR-Fail
View all Biostar MCP6P3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
MCP6PB M2+/N68S BIOS Setup HPET Support This item allows you to control the high precision event timer. The Choices: Enabled (default), Disabled. POWER ON Function This item allows you to choose the power on method. The Choices: Button Only (default), Password, Hot Key, Mouse Move/Click, Mouse Double Click, Any Key, Keyboard 98. KB Power ON Password Input password and press Enter to set the Keyboard power on password. Hot Key Power ON Choose the Hot Key combination to boot up the system. The Choices: Ctrl-F1 (default), Ctrl-F2, Ctrl-F3, Ctrl-F4, Ctrl-F5, Ctrl-F6, Ctrl-F7, Ctrl-F8, Ctrl-F9, Ctrl-F10, Ctrl-F11, and Ctrl-F12. PWRON After PWR-Fail This setting specifies how your system should behave after a power fail or interrupts occurs. By choosing off will leave the computer in the power off state. Choosing On will reboot the computer. Former-Sts will restore the system to the status before power failure or interrupt occurs. The Choices: Off (default), On, Former-Sts. 28