Biostar MCP6P3 Bios Setup - Page 37
DRAM Configuration - manual
View all Biostar MCP6P3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
MCP6PB M2+/N68S BIOS Setup DRAM Configuration Timing Mode The Choices: Auto (default), MaxMemClk, Manual. Memory Clock value or Limit The Choices: DDR 400 (default), DDR 533, DDR 667, DDR 800. DCTs Mode This item controls the DRAM controller ganged (128bit*1) / unganged (64bit*2) dual-channel operation mode. If two DRAM modules with different size are installed, using unganged mode can still make it run in dual-channel operation. The Choices: Unganged (default), Ganged. CKE base power down mode The Choices: Enabled (default), Disabled. CKE base powerdown The Choices: Per Channel (default), Per CS. Memclock tri-stating The Choices: Disabled (default), Enabled. 37
MCP6PB M2+/N68S BIOS Setup
37
DRAM Configuration
Timing Mode
The Choices: Auto
(default), MaxMemClk, Manual.
Memory Clock value or Limit
The Choices: DDR 400
(default), DDR 533, DDR 667, DDR 800.
DCTs Mode
This item controls the DRAM controller ganged (128bit*1) / unganged
(64bit*2) dual-channel operation mode.
If two DRAM modules with different
size are installed, using unganged mode can still make it run in dual-channel
operation.
The Choices: Unganged (default), Ganged.
CKE base power down mode
The Choices: Enabled
(default), Disabled.
CKE base powerdown
The Choices: Per Channel (default), Per CS.
Memclock tri-stating
The Choices: Disabled (default), Enabled.