Biostar MCP6P3 Bios Setup - Page 39

<Trp> Row Precharge Time, <Tras> Minimum RAS Active T

Get Biostar MCP6P3 PDF manuals and user guides View all Biostar MCP6P3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

MCP6PB M2+/N68S BIOS Setup Row Precharge Time The Choices: 6 clocks (default), 3 clocks, 4 clocks, 5 clocks. Minimum RAS Active T The Choices: 18 bus clocks (default), 5-17 bus clocks. Special Notice: If the system's frequency that you are selected is not functioning, there are two methods of booting-up the system. Method 1: Clear the CMOS data by setting the JCMOS1 ((2-3) closed)) as "ON" status. All the CMOS data will be loaded as defaults setting. Method 2: Press the key and Power button simultaneously, after that keep-on pressing the key until the power-on screen showed. This action will boot-up the system according to FSB of the processor It's strongly recommended to set CPU Vcore and clock in default setting. If the CPU Vcore and clock are not in default setting, it may cause CPU or M/B damage. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
MCP6PB M2+/N68S BIOS Setup
39
<Trp> Row Precharge Time
The Choices: 6 clocks
(default), 3 clocks, 4 clocks, 5 clocks.
<Tras> Minimum RAS Active T
The Choices: 18 bus clocks
(default), 5-17 bus clocks.
Special Notice:
If the system’s frequency that you are selected is not functioning, there are two methods
of booting-up the system.
Method 1:
Clear the CMOS data by setting the JCMOS1 ((2-3) closed)) as “ON” status. All the
CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that keep-on pressing the
<Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor
It’s strongly recommended to set CPU Vcore and clock in default setting. If the CPU
Vcore and clock are not in default setting, it may cause CPU or M/B damage.