Biostar P4TCA PRO P4TCA Pro user's manual - Page 4
AChip, IDE-Raid, Giga LAN, Wireless LAN - Air Link, On Board AC'97 Sound Codec, Wireless Audio
View all Biostar P4TCA PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Supports PIO Mode 4, Bride Mode and Ultra DMA 33/66/100 Bus Master Mode. Supports 2 Serial ATA (SATA) ports. - Compliant with SATA 1.0 specification - Data transfer rates up to 1.5 GB/s 1394AChip Chip: VIA VT6307. Support 2 ports with transfer up to 400mbps. IDE-Raid Chip: VIA VT6410. Supports RAID Level 0, RAID Level 1, RAID 0+1 Level and JBOD. Complies with Scatter/Gather Bus Master DMA Mechanism. Dual Channel Master Mode PCI supporting four enhanced IDE devices. Complies with ATA/ATAPI7. Giga LAN Chip: Intel 82547EI. Full-duplex Gigabit Ethernet performance. Supports Communication Streaming Architecture Interface(CSA). - Theoretical bandwidth of 266Mbytes/sec - Direct connect to the MCH of Intel® 865 and 875 chipsets - CSA is useable to both system and the OS Wireless LAN - Air LinkTM Chip: RTL8180. Full compliance with IEEE802.11 and IEEE802.11b specifications. Supports Advanced Configuration Power management Interface.(ACPI) and PCI power management system for modern operating systems. Supports remote wake-up in both ACPI and APM environments. Keeps network maintenance costs low and eliminates usage barriers. Uses one RF card for Wireless LAN. On Board AC'97 Sound Codec Chip: CMI9739A/9760. Compliant with AC'97 specification. AC97 2.2/2.3 interface. Supports 6 channels. Wireless Audio (optional) Supports 2 channels. On Board Peripherals a. Rear side Supports 2 serial ports. Supports 1 parallel port. (SPP/EPP/ECP mode) Supports Audio ports in vertical. Supports 1 RJ-45 LAN jack. 2