Biostar TFORCE 6100 AM2 Setup Manual - Page 90
MAC Media Interface, IDE HDD Block Mode, POWER After PWR-Fail
View all Biostar TFORCE 6100 AM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
TForce 6100 AM2 BIOS Setup MAC Media Interface This option allows you to control the onboard MAC Media Interface. The Choices: Pin Strap (default), Disabled IDE HDD Block Mode Block mode is also called block transfer, multiple commands, or multiple sectors read / write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read / write per sector where the drive can support. The Choices: Enabled (default), Disabled. POWER After PWR-Fail This setting specifies how your system should behave after a power fail or interrupts occurs. By choosing off will leave the computer in the power off state. Choosing On will reboot the computer. Former-Sts will restore the system to the status before power failure or interrupt occurs. The Choices: Off (default), On, Former-Sts. 24