Bissell Carpet Cleaners User Guide - Page 17

Maintenance and care Machine care continued 5. Before you place the cleaned 2-in-1 water tank back onto the machine, remove the red solution filter cap (on the base of the machine).Remove the cap by inserting a coin or a flat head screw driver into the slot on the top. Turn counter clock wise and unscrew. Set aside. 5a. Remove the white filter by grasping the post and pulling up and out of the unit. Rinse the filter under cold water. Note: Be careful not to drop the filter into the sink or disposal. 5b. Replace the white filter back into the filter area. Note: Make sure the white filter is seated properly before placing the red solution filter cap. 5c. Replace the red solution filter cap and turn clockwise to tighten. 6. Keeping the 2-in-1 water tank off of the base of the machine, simply unscrew the floor nozzle using a Phillips head screwdriver. This can be rinsed out at the faucet. Then replace back onto the machine by starting from the bottom of the nozzle and hooking the tabs into the holes on the bottom sides of the machine. Secure into place with the screw. 5a. Solution Filter Cap 5b. 5c. Filter 6. www.bissell.com 17 800.237.7691