Bissell Carpet Cleaners User Guide - Page 9

Operations Before you clean continued 4. Pretreating (optional) Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hallways. BISSELL Tough Stain PreCleaner a. Spray the BISSELL Tough Stain PreCleaner formula onto heavy traffic areas, soiled areas, or stains. b. Allow to penetrate for at least 3 minutes. c. Clean as normal, using the BISSELL PROheat 2X machine on the high traffic setting, following the instructions below. Carpet cleaning 1. Fill the 2-in-1 Water Tank. Remove the tank from the base of the machine by lifting up the tank carry handle. Carry like a bucket 1. to the sink. 1a. Unlatch the top of the tank from the bottom by lifting up on the tank latch located on the back of the tank. 1b. Remove the top of the tank by lifting up on the handle. Note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank 1b. back together. 1c. Fill the heavy duty bladder with clean hot tap water. Do not boil or microwave water as it can destroy the bladder. 1d. Leaving the filled bottom of the tank on a flat surface, only maneuver the top of the tank. To attach the top part of the 1d. tank to the bottom, carefully hook the lip on the top tank into the groove on the bottom tank. 1e. Fasten tanks together by securing the latch in the back. Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank. www.bissell.com 1a. 1c. 1e. 9 800.237.7691