Bissell Carpet Cleaners User Guide - Page 19
Brush removal and large belt replacement
![]() |
View all Bissell Carpet Cleaners manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Maintenance and care Brush removal and large belt replacement Brushes can be removed for cleaning or replacement as needed. 1. Follow small belt removal Instructions on page 18. 2. Remove brush rolls by pulling them off of the metal rods. Be careful not to lose the small washer at each end of the brush rolls. 2. 3. Place cleaned or new brush rolls back onto the rods. Make sure one washer is on each end of the rollers prior to sliding onto the rod. Be sure to let the rod slide through the bushing to insure proper fit. WARNING: To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing. 3. 4. Re-attach the long belt on the bottom to the cogs of the small roller brushes. 4. 5. 5. Place small belt over back roller and metal cog. 6. Place pivot arm in place and screw in place using the silver screw. 7. Re-attach clear end cap by tightening with the (2) black screws. 8. Return front nozzle to front of unit, by 6. 7. latching from underneath and then securing with a screw. If you have any questions or are having trouble installing or replacing your belt(s) or brushes, please call BISSELL Consumer Services. 8. www.bissell.com 19 800.237.7691
![](/manual_guide/products/bissell-proheat-2x-select-pet-upright-carpet-cleaner-94003-user-guide-e4ab728/19.png)