Bissell ICONpet Cordless Vacuum 22889 User Guide - Page 5
Assembly, Installing the Wall Storage & Charging Station
View all Bissell ICONpet Cordless Vacuum 22889 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Assembly Go to support.BISSELL.com for assembly videos. 1. Connect the Extension Wand to Motorized Floor Cleaning Foot. You'll hear a "click" when they're connected. 2. Connect the Hand Vacuum Assembly to the Extension Wand. You'll hear a "click" when they're connected. 3. Make sure to charge your stick vacuum before first use. Refer to page 6, "Charging the Battery" for instructions. Installing the Wall Storage & Charging Station Go to support.BISSELL.com for more tips and video instructions on installing the Wall Storage & Charging Station. 1. Open the Wall Storage & Charging Station, use the bubble level to ensure it is level and insert two screws to secure to wall. In order to charge the machine, ensure the Wall Storage & Charging Station is mounted near a wall outlet. 2. Insert the tool holders into the side of the Wall Storage & Charging Station. To install the charging cord, remove the power cord clip from the Wall Storage & Charging Station. Insert the charging cord and secure it with the charging cord clip. 3. Plug the power adapter into the wall and place the machine on the Wall Storage & Charging Station for charging. Refer to page 6, "Charging the Battery" for instructions. BISSELL.com 5