Bissell ICONpet Cordless Vacuum 22889 User Guide - Page 8

Emptying the Dirt Tank More of a video person? Go to support.BISSELL.com for additional how-to videos. 1. Turn OFF your machine. Remove the Dirt Tank from the hand vacuum by sliding the latch on the front of the tank. 2. Grab the top of the tank and pull up. This will activate a wiping feature to remove debris from the mesh filter screen. 3. Fully remove the separator from the tank and tap the mesh screen on the side of the trash bin. 2 1 4. Dump dirt from the tank into the trash bin. 5. Slide the separator back into the tank, ensuring the notch is seated into the tank correctly. 6. Put the whole tank into the hand vacuum by guiding the notched out area on the bottom of the tank onto the hook on the hand vacuum. Push into place. Removing the Brush Roll Go to support.BISSELL.com for a full list of maintenance and troubleshooting support. 1. Turn the machine OFF and press the Foot Release Button to disconnect the Motorized Floor Cleaning Foot from the Extension Wand. 2. With a flathead screwdriver or coin, twist the slot on the side of the foot clockwise and pull the Brush Roll out. 3. To replace, push the Brush Roll back in the chamber and twist counter-clockwise with a tool or coin to lock in place. WARNING »»Before using your vacuum, make sure that the Dirt Tank is in locked position and that all filters, both pre and post-filters, are in place. DO NOT operate your vacuum without these filters. 8 BISSELL.com