Bissell ProHeat 2X Revolution Pet Pro Carpet Cleaner 1986 User Guide - English - Page 13

Bare Floor Cleaning* *Bare Floor Tool not included with machine. WARNING WARNING: To reduce the risk of fire and electric shock when cleaning a hard floor, the BISSELL bare floor tool must be used and is only to be used with BISSELL Hard Floor Solutions formula intended for use with this appliance. NOTE: The bare floor tool that is compatible with the ProHeat 2X Revolution is not included. It is available for purchase by contacting our team by phone or visting us online at BISSELL.com. 1 2 3 With the machine unplugged, attach the bare floor tool to the bottom of the machine by lining the tool to the edge of the nozzle. Rotate down until it clicks into place. Follow filling instructions on page 10 or 11 and switch cleaning mode to Express Clean. Plug into a properly grounded outlet and press the power button. Clean by pressing the trigger for 1 wet pass forward, 1 wet pass back, and then release the trigger and make 1 dry pass forward, 1 dry pass back. When finished, unplug the machine and remove the bare floor tool by rotating the tool up to unhook from the nozzle. Rinse and let dry before storing. Refer to page 16 for emptying the dirty water tank. Refer to page 17 for cleaning your machine before storing. Area Rug Cleaning Important! Please check manufacturer's tag before cleaning area rugs for any specialized cleaning instructions. We do not recommend deep cleaning delicate, silk, wool, antique or area rugs without a manufacturer's tag. Regularly clean your high-traffic area rugs in Express Clean Mode: • Check the manufacturer's tag. • Select Express Clean Mode. • When cleaning area rugs, place the rug on a sealed surface to test for colorfastness in an inconspicuous area. Your cleaner should not be used on unsealed surfaces. • Important: Keep the foot of the deep cleaner perpendicular to the rug's edge with each cleaning pass to prevent damage. www.BISSELL.com 13