Bissell ProHeat 2X Revolution Pet Pro Carpet Cleaner 1986 User Guide - English - Page 18
Replacing Belts & Brush Rolls
View all Bissell ProHeat 2X Revolution Pet Pro Carpet Cleaner 1986 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Brush Roll & Nozzle Care (Continued) 5 6 click Use the comb to brush out the debris or hair from the brush rolls. When finished, return the brush roll cover by pushing it straight down. You will here a click from each "push" button when the cover is pushed down into place. Line up the nozzle from the edge near the floor and rotate to snap back into place. Replacing Belts & Brush Rolls What you will need: 1 Phillips screwdriver & 1 flathead screwdriver 1 While the machine is upright, unplug the machine and remove both tanks. Remove the nozzle and brush chamber cover (see steps in Brush Roll & Nozzle Care). Press the recline pedal and lay the machine on its back. 2 Use a flathead 3 Turn the machine on its side and use a Philips screwdriver to remove the screwdriver and screw just underneath the wheel. Slide press it into the slot the wheel down to remove. at the back and then front of the belt access door. Lift to remove the Belt Access Door. 4 5 Lay the machine If the Gear Belt back down on is broken, gently its back. Use a remove it. If you Phillips-head are replacing your screwdriver to brush rolls, gently remove the screw remove the belt. on the brushroll end cap. 18 www.BISSELL.com