Bissell ProHeat Pet Deep Cleaning System 89104 User Guide - English - Page 11

Operation Empty the tank 1. Remove the water tank from the base using 1. the tank carry handle. Carry the tank like a bucket to a utility sink or outside where you will dispose of the collection water. Remove the top of the tank by rotating the handle forward to unlatch lid and lifting lid off tank. 2. Empty collection water from bottom of tank. NOTE: You may notice hair & debris deposits 3. on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that have never been deep cleaned before). This debris should be picked up and thrown away. 3. After each use, remove and rinse the lint screen located on the tank lid. 4. Refill the Tank-in-Tank by referencing "Fill the water tank" on page 9. Remember to secure the top of the tank by rotating the 4. handle and test to make sure it is secure before picking up. 5. Return Tank-in-Tank to the machine. NOTE: Always check the level of cleaning formula in the SmartMix tank at the same time, and refill as needed Rinse (optional) Rinsing is an optional step that can be done during the cleaning process by switching to the water rinse setting, or it can be done after the carpeted area has been cleaned. 1. Simply choose the water rinse setting on the 1 SmartMix dial, and follow the same path as you did for cleaning, taking care to do a forward (wet) stroke by depressing the trig- ger, a backward (wet) stroke, and a forward and backward (dry) stroke, releasing the trigger. Continue this until the water you see coming up the nozzle is clear. 2. 5. When filling bottle or storing unit, set dial to: WATER RINSE www.bissell.com ug120-4080_7350_908.indd 11 800.237.7691 11 10/14/08 1:27:00 PM