Bissell SpotBot Pet Deep Cleaner 33N8A User Guide - Page 11

Operations Manual cleaning continues 11. 10. Press the STOP button to turn off the SpotBot. 11. Disconnect the cleaning tool from the vacuum flex hose by pushing down on the button lock and pulling straight off (do not twist tools to remove them). 12. Unplug the machine and wrap the cord around the cord wraps. Attach the Tough Stain Brush to the base of SpotBot. Wrap the hose around the machine. Storage 1. Press the STOP button to turn the unit off. Unplug the power cord from the outlet. Wrap power cord around the cord wrap. 2. Empty and rinse the dirty water/ collection tank after each use, or when dirty water reaches the indicated maximum fill line. To remove the tank, lift up the dirty tank latch and pull the tank out. Dump out the dirty water and rinse. Replace the tank into the unit for storage. After using the SpotBot's automated feature, wipe the window and brushing area with a soft cloth. Tip: If a significant amount of water and solution remains in the clean tank, your unit can be stored with liquid in the clean tank. However, if you have added Oxy GEN2 into the clean tank, fresh Oxy GEN2 should be added prior to the next use to optimize performance. 2. 3. 3. If you were using your SpotBot manually, wrap the vacuum flex hose around the unit and secure the hose into the hose connector on the front of the unit. 4. Store unit indoors at room temperature (40° to 110°F). Tip: Clean out the black valve periodically inside of the dirty water/collection tank. w w w. b i s s e l l . c o m 11 800.237.7691