Bissell SpotBot Pet Deep Cleaner 33N8A User Guide - Page 9

Operations To begin cleaning 1. Place the filled clean water/solution tank onto the unit. 2. Plug your SpotBot in. The power light will illuminate, indicating your SpotBot is ready to go. Automated cleaning 1. Place the unit directly over the spot or stain, making sure the stain is in the center of the cleaning area. 2. Select which cleaning cycle (surface stain or set-in) you would like to use. SpotBot will begin spraying, brushing and suctioning the soiled area, in a pre-programmed cycle. Both cycles have been tested and proven to deliver superior cleaning results, taking the guesswork and effort out of cleaning for you. 3. When the cleaning cycle you have selected is complete, the Finish light will illuminate and the machine will sound a series of "beeps". Press the STOP button to turn the machine off. The machine will not beep when turned off. 4. Pick up the unit and check the area that was cleaned. 5. If you use Oxy GEN2, it will continue to work for the next six to eight hours, cleaning your spots and stains all the way to the backing of the carpet. Tip: Dry vacuum the area first before spot cleaning with the SpotBot. w w w. b i s s e l l . c o m 9 800.237.7691