Bissell SpotBot Pet Deep Cleaner 33N8A User Guide - Page 13

Troubleshooting Cleaner will not run Possible causes Manual cleaning Remedies 1. Power cord not plugged in 2. Blown fuse/tripped breaker 3. Hose not removed from receiver 4. SpotBot shut off automatically during use 1. Check electrical plug 2. Replace household fuse or reset breaker 3. Remove hose 4. Press start button to resume manual cleaning Unusual or odd noise Possible causes Remedies 1. Clean water/solution tank is out of fluid 1. Fill clean water/solution tank Reduce or no spray Possible causes Remedies 1. Spray tip clogged on Tough stain brush 1. Clean spray tip 2. Clean water/solution tank is out of fluid 2. Fill clean water/solution tank 3. Clean water/solution tank is not inserted into the unit securely 3. Gently press the clean water/solution tank until you see "bubbles" coming from the base of the tank No suction Possible causes Remedies 1. Tank is full 2. Dirty water/collection tank latch is not down 3. Black valve on the dirty water/collection tank is missing 1. Empty tank 2. Push latch down, securely into place 3. Replace black valve into dirty water/collection tank Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not return this product to the store. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. w w w. b i s s e l l . c o m 13 800.237.7691