Bissell SpotBot Pet Deep Cleaner 33N8A User Guide - Page 8

Operations How to begin Using the Automatic Smart System™ Your new SpotBot features an Automatic Smart System that takes the guesswork out of spot and stain removal. With the touch of a button, you can select the cleaning cycle to use your preferred method of cleaning. 1. Surface Stain Cycle This cycle has been designed for stains that are on the surface of your carpeting. This cycle will run for approximately 3 minutes. 2. Set-In Stain Cycle Use on stains that have had a period of time to set-in. These are typically the most difficult stain types to remove. This cycle runs for approximately 6 minutes. 3. Manual/Hose By selecting this option you can clean spots and stains manually on surfaces such as upholstery, stairs, car interiors, or any other hard to reach area. 4. Pause/Resume If you press the pause/resume button once, it will pause the cleaning cycle. Press again to resume your current cleaning cycle. 5. Stop By pressing the red stop button, you will stop the cleaning cycle completely. To begin cleaning again, you will need to start over and select a cleaning cycle. 6. Status Indicator Lights Will give you a visual update on the cleaning cycle. During a cleaning cycle you will hear changes in the sound of the machine that correspond with a given step. When the cleaning cycle is complete, the Finish light will illuminate and you will hear a series of "beeps". Press the STOP button to turn the machine off. The machine will not beep when turned off. Tip: Some spots and spills require that you pick up the chunky debris with a rag or towel before you begin cleaning in the automatic or manual cycles. 8 w w w. b i s s e l l . c o m 800.237.7691