Bissell Trilogy Pet User Guide - Page 7

Operations Handle positions 1. In upright position, tilt cleaner back on its rear wheels to transport from room to room. The vacuum can also be moved by using the carrying handle on front of the vacuum. 2. Using your foot, press handle release pedal on the lower left side of the vacuum to recline vacuum in cleaning position. NOTE: The brush will only rotate when vacuum is in reclined cleaning position, it will not rotate when in upright position. Height adjustments Turn Dial on Powerfoot to adjust to one of 7 Height Adjustments: Lowest setting - for low pile carpet or bare floors. Medium settings - for medium pile carpet. High setting - For high pile and most shag carpet. Adjust to high setting if difficult to push. Note: For optimal carpet cleaning performance adjust to lowest practical setting. If your vacuum is difficult to push, adjust to the next higher setting. If the dial is difficult to turn, tilt the cleaner back slightly to take the weight off of the foot while turning. Handle release Pedal ATTENTION: Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area may aggravate this condition. Consider setting your cleaner on a higher than normal setting for this type of carpet. NOTICE: While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply. www.bissell.com 7 800.237.7691