Bissell Vacuums User Guide - Page 3

What's in the Box? Standard accessories may vary by model. BISSELL® SpinWave® Robot with Dirt Bin Formula Water Mop Tank with Mop Pads Docking Station Docking Tray Power Adapter Trial-Size Formula Edge Cleaning Brushes (select models) (2) Extra Mop Pads Docking and Charging Your Robot Go to support.BISSELL.com for assembly videos. Note: The Docking Station & Docking Tray must be installed on a hard surface. The robot's soft surface sensors prevent it from cleaning carpets and area rugs in mop mode. Be sure the device is near your WiFi router and the robot is fully charged or in the dock during the pairing process. Wi-Fi Water Formula 40 inches (1m) 480 inches ((21mm)) 40 inches (1m) 1. Place the back of Docking Tray firmly against a wall. Ensure there are at least 40 inches to one side, 40 inches to the opposing side and no obstructions in the front. Tip the Docking Station into the Docking Tray. 2. Insert the Docking Station Power Adapter plug into the port on the side of the Docking Station. Plug the other end into the wall outlet. 3. Turn the robot ON and put it on the Docking Station. The first charge will take 4-5 hours. Status Button Light State Light Ring Power ON Pulse Once > Blink > On Pulse Once Cleaning Blink > Fade In > On Pulse Once > Fade In > 30 seconds > Fade Out Charging Breathing Pulse Once > Breathing for 30 seconds > Off Pairing Mode Blink Off Paired On Solid for 5 Seconds > Fade Out Sound Activation Sound Activation Sound 1 Beep 1 Beep 3 beeps BISSELL.com 3