Bissell Vacuums User Guide - Page 6

Mop Mode (continued) Sanitizing with Spot Mode Spot mode can be used with BISSELL Hard Floor Sanitize Formula to sanitize floors after tough messes, like a pet accident. Spot mode also works to give certain areas extra cleaning attention when used with BISSELL Multi-Surface or Hard Floor Formulas. Access Spot mode in the BISSELL Connect App. Note: You can sanitize 3 or 4 different areas around your home with a single tank. HARD FLOOR SANITIZE Formula Water 1. Add BISSELL Hard Floor Sanitize formula following the steps on page 5. 2. Wipe up the mess with disposable towel. 3. Place the robot in the center of the area you want to clean and select "Spot" mode in the BISSELL Connect App. 40 inches (1m) 40 inches (1m) Formula Water Formula Water 4. The robot will clean in a spiral pattern, covering an area approximately 40" x 40" or 1m x 1m for approximately 5 minutes. The robot will beep to let you know it's finished. 5. Use caution when removing robot as the floor may be slippery. Allow to remain wet for 5 minutes. Manual Cleaning x2 1. Turn the robot ON. Press the Start/Pause Button to start cleaning. 2. The robot will clean hard surfaces and avoid most soft surfaces, such as area rugs and carpet. 3. Return the robot to the dock. Press the Start/Pause Button twice. The light ring will flash white as it finds its way back. Note: The robot will stop if water is low. To resume cleaning, refill Mop Tank and push the Start/Pause Button. 6 BISSELL.com