Bissell Vacuums User Guide - Page 8

Dry Vacuum Mode (continued) Maintaining the Dirt Bin 1. Turn the Power Switch OFF. Press the button on top of the Dirt Bin and pull to remove. 2. Open filter door by pulling both sides apart. Empty the debris from the Dirt Bin. 3. Remove the filter cover, then the foam and pleated filters. 4. Use the cleaning tool to brush the filter cover and filters. Do not wash the filters. 5. With filters removed, rinse the Dirt Bin with tap water. Ensure Dirt Bin is completely dry before reinstalling. Do not machine wash the Dirt Bin. 6. Once clean, reinstall the filters and filter cover, close and push back into the machine. Cleaning the Brush Roll Check out the BISSELL Connect App for tips and videos on Brush Roll Maintenance. 1. Turn the Power Switch OFF. Pinch the tabs on the brush guard inward and pull to remove. Lift to remove the Brush Roll. 2. Clean the Brush Roll with the cleaning tool. 3. Replace the Brush Roll and brush guard. Note: The Brush Roll has two different end pieces. Ensure the square- shaped end piece is inserted into the square-shaped port. WARNING To reduce the risk of electric shock, turn the Power Switch OFF before performing maintenance or troubleshooting checks. 8 BISSELL.com