Bosch B09IB80NSP Instructions for Use - Page 17

Odors, Light LED, Tips for saving energy, Operating noises

Get Bosch B09IB80NSP PDF manuals and user guides View all Bosch B09IB80NSP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Removing the container Pull out the container all the way, lift at the front and remove. Odors If you experience unpleasant odors: 1. Switch off the appliance with the On/Off button ÿ. 2. Take all food out of the appliance. 3. Clean interior (see chapter "Cleaning the appliance"). 4. Clean all packages. 5. Seal strong smelling food in order to prevent odors from forming. 6. Switch the appliance on again. 7. Store food in the appliance. 8. Check whether the formation of odors is still occurring after 24 hours. Light (LED) Your appliance features a maintenance-free LED light. These lights may be repaired by customer service or authorized technicians only. en-us Tips for saving energy ■ Install the appliance in a dry, well ventilated room! The appliance should not be installed in direct sunlight or near a heat source (e.g. radiator, stove). If required, use an insulating plate. ■ Select 560 mm niche depth. A smaller niche depth will result in a higher energy consumption. ■ Allow warm food and drinks to cool down before placing in the appliance. ■ Thaw frozen food in the refrigerator compartment and use the low temperature of the frozen food to cool refrigerated food. ■ Open the appliance as briefly as possible. ■ Ensure that the freezer compartment door is always closed properly. ■ Occasionally clean the rear of the appliance to prevent increased power consumption. ■ The arrangement of the fittings does not affect the energy absorption of the appliance. Operating noises Quite normal noises Droning Motors are running (e.g. refrigeration units, fan). Bubbling, humming or gurgling noises Refrigerant is flowing through the tubing. Clicking Motor, switches or solenoid valves are switching On/ Off. Cracking Automatic defrosting is running. Preventing noises The appliance is not level Align the installation cavity with a spirit level. To do this, use the height-adjustable feet of the cavity or place something underneath. Containers or storage areas wobble or stick Please check the removable parts and re-insert them correctly, if required. Containers are touching Move the containers slightly apart. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
en-us
17
Removing the container
Pull out the container all the way, lift at the front and
remove.
Odors
If you experience unpleasant odors:
1.
Switch off the appliance with the On/Off button
ÿ
.
2.
Take all food out of the appliance.
3.
Clean interior (see chapter “Cleaning the
appliance”).
4.
Clean all packages.
5.
Seal strong smelling food in order to prevent odors
from forming.
6.
Switch the appliance on again.
7.
Store food in the appliance.
8.
Check whether the formation of odors is still
occurring after 24 hours.
Light (LED)
Your appliance features a maintenance-free LED light.
These lights may be repaired by customer service
or authorized technicians only.
Tips for saving energy
■
Install the appliance in a dry, well ventilated room!
The appliance should not be installed in direct
sunlight or near a heat source (e.g. radiator, stove).
If required, use an insulating plate.
■
Select 560 mm niche depth.
A smaller niche depth will result in a higher energy
consumption.
■
Allow warm food and drinks to cool down before
placing in the appliance.
■
Thaw frozen food in the refrigerator compartment
and use the low temperature of the frozen food
to cool refrigerated food.
■
Open the appliance as briefly as possible.
■
Ensure that the freezer compartment door is always
closed properly.
■
Occasionally clean the rear of the appliance
to prevent increased power consumption.
■
The arrangement of the fittings does not affect
the energy absorption of the appliance.
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigeration units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Clicking
Motor, switches or solenoid valves are switching On/
Off.
Cracking
Automatic defrosting is running.
Preventing noises
The appliance is not level
Align the installation cavity with a spirit level. To do this,
use the height-adjustable feet of the cavity or place
something underneath.
Containers or storage areas wobble or stick
Please check the removable parts and re-insert them
correctly, if required.
Containers are touching
Move the containers slightly apart.