Bosch DB18C3100R2 Installation Guide - Page 44
General Camera Settings, Video and audio connections, Camera
View all Bosch DB18C3100R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
44 en | Default Configuration 6.2.1 General Camera Settings Video and audio connections menu > Camera section > Edit button DiBos/DiBos Micro Make the settings for each camera as required. 1 General settings Click the tab. 2 Name: Enter the name of the camera. The name must not contain any special characters or end with a space. 3 Video loss Activate this check box if a warning should be shown on camera signal failure. Note: The malfunction relay is also activated if a relay output is selected as a malfunction relay in the configuration (Inputs and outputs menu, Relay tab). 4 Bilinx settings Click the button to access the Bilinx camera navigation menu. The Bilinx camera menu is displayed in the image window. Note: Only selectable for Bilinx-capable cameras. 5 Image properties Set brightness, contrast, color and hue. You can see the result of these settings in the camera image (Hue is only active on NTSC cameras). 6 AGC Activate this check box if the camera signal on the grabber (AGC = automatic gain should be amplified. control) 7 Gain: Manually correct the input level audio level at the grabber using the slider. Note: Only possible when AGC is not activated. F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH