Bosch DB18C3100R2 Installation Guide - Page 48
Entering control commands via the command line, Camera control, Saving entries
View all Bosch DB18C3100R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
48 en | Default Configuration DiBos/DiBos Micro Entering control commands via the command line Here, you can specify various commands for dome cameras, pan/tilt cameras or matrix switches via a command line. These commands can be called up manually or automatically. The choice of commands available can be found in the operating manual of the respective camera or matrix switch. The user can quickly select these commands in the live image, assuming that these have been enabled for his level of authorization. 5 Camera command line Save... Transmit First line: The list contains preset control commands that you can select. Middle line (command line): The command that you selected in the first line is displayed. Alternatively, you can use this line to create a new command if you do not find a suitable command in the drop-down list for the first line. Bottom line: Assign the command a free number. Click the button to save. A dialog box opens. Enter a meaningful name and confirm the entry. A message confirms that this has been saved. Note: The command is available on the user interface. Click the button to check the command. Delete The saved command will be deleted. Camera control The focus and iris can be set for each camera 6 Bilinx status: The status is displayed. Iris and focus... Saving entries 7 OK Click the button. A dialog box opens to allow you to set the iris and focus. The entries are saved. F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH