Bosch HEI7052U Installation Instructions - Page 5

General Information, Preparation - rating

Get Bosch HEI7052U - 30 Inch Slide-In Electric Range PDF manuals and user guides
UPC - 825225842132
View all Bosch HEI7052U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

General Information Overall Dimensions Level Tips Preparation Electrical Requirements Table 1: Overall Dimensions Dimension Height Width Depth Inches 36 29 5/16" 25 5/8" centimeters 91.44 cm 74.55 cm 65.09 cm For best results, cabinets, countertops walls and floors in the installation location should be as level and plumb as possible. Variance may cause damage to countertops and floors during installation, could jeopardize the seal around the cooktop and may adversely affect cooking and baking performance. Tape warming drawer shut to keep it from opening while installing the range. During installation, place a portion of the box or a piece of cloth under the range to protect floors. To make range lighter and easier to handle remove door (see instructions in Use and Care manual). Refer to data plate for more information. See "Product Data Plate" on page 17 for data plate location. We recommend that the range be installed with a power cord set (not supplied).1 The electrical rating of the power cord set must be 120/240 volt, 40 or 50 amperes minimum (depending on local code). The power cord set shall be marked "For Use with Ranges." Always use a new power cord. Note: In Canada, the range is shipped from the factory with the range cord already installed. Ranges are dual rated for use on either 120/240 VAC or 120/208 VAC. Check the data plate for the kW rating. Reference the kW rating in the table below to determine amperage requirements. Table 2: Electrical Specifications kW Rating Hz Amps Req'd 120/240V 120/208V 13 9.8 60 13.8 10.4 60 a. Varies by location. Check local codes. 40 or 50a 40 or 50a 1.Not needed for Canadian installations English 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
English 3
General Information
Overall Dimensions
Level
For best results, cabinets, countertops walls and floors in the installation location
should be as level and plumb as possible. Variance may cause damage to coun-
tertops and floors during installation, could jeopardize the seal around the cooktop
and may adversely affect cooking and baking performance.
Tips
Tape warming drawer shut to keep it from opening while installing the range.
During installation, place a portion of the box or a piece of cloth under the range to
protect floors.
To make range lighter and easier to handle remove door (see instructions in Use
and Care manual).
Preparation
Electrical Requirements
Refer to data plate for more information. See “Product Data Plate” on page 17 for
data plate location.
We recommend that the range be installed with a power cord set (not supplied).
1
The electrical rating of the power cord set must be 120/240 volt, 40 or 50
amperes
minimum (depending on local code). The power cord set shall be marked “For
Use with Ranges.” Always use a new power cord.
Note:
In Canada, the range is shipped from the factory with the range cord
already installed.
Ranges are dual rated for use on either 120/240 VAC or 120/208 VAC. Check the
data plate for the kW rating. Reference the kW rating in the table below to deter-
mine amperage requirements.
Table 1: Overall Dimensions
Dimension
Inches
centimeters
Height
36
91.44 cm
Width
29 5/16”
74.55 cm
Depth
25 5/8”
65.09 cm
1.Not needed for Canadian installations
Table 2: Electrical Specifications
kW Rating
Hz
Amps Req’d
120/240V
120/208V
13
9.8
60
40 or 50
a
a. Varies by location. Check local codes.
13.8
10.4
60
40 or 50
a