Bosch HES7132U Installation Instructions - Page 10

4. Remove ground strap from center post, rotate so that wide end is at top and attach wide end to range through hole below junction box. Attach green wire on top of ground strap. Tighten Screw. green ground screw ground strap ground wire Figure 7: Four Wire Range cord Connection - Ground Strap and Wire 5. Attach red wire, round washer, star washer and nut IN THIS ORDER to left post. 6. Attach white wire, round washer, star washer and nut IN THIS ORDER to center post. 7. Attach black wire, round washer, star washer and nut IN THIS ORDER to right post. black white red Figure 8: Four Wire Range Cord connection Continued 8. Tighten all connections securely and replace terminal block cover. 9. Properly secure strain relief (see previous section). Note: DO NOT plug in range at this time. 5B) Three Wire Range Cord Connec- The Four Wire Connection (above) is preferred, but where local codes and ordi- tion nances permit grounding through neutral and where conversion to four wire is impractical, the unit may be connected to the power supply via a three wire con- nection. 1. Disconnect electrical power at breaker box. English 8