Bosch SHV78B73UC Use and Care Manuals - Page 51

Loading dishware,

Page 51 highlights

Troubleshooting en-us Issue There are colored deposits (yellow, orange, brown) that are ey to remove inside the appliance (mainly at the bottom). Cause and troubleshooting The formation of films is due to ingredients of food remnants and tap water (limescale), "soaplike". 1. Check the setting of the water softening sys- tem. → "Setting the water softening system", Page 23 2. Add special salt. 3. If you are using combined detergents (tabs), activate the water softening system. Follow the information on detergents. Plastic parts inside the appliance are discolored. Plastic parts inside the appliance may become discolored over the life of the dishwasher. ▶ Discoloration may come about and will not impair functioning of the appliance. Plastic parts are dis- Dishwashing temperature is too low. colored. ▶ Select a program with a higher dishwashing temperature. Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. ▶ Only remove large remnants of food and do not pre-rinse dishware. ▶ Adjust the sensitivity of the sensors. → "Sensors", Page 10 There are remov- Amount of rinse aid to be dispensed is set too able streaks on high. glasses, glassware ▶ Set the rinse aid system to a lower setting. with a metallic ap- → "Setting the amount of rinse aid", Page 25 pearance and silver- ware. No rinse aid has been added. ▶ Add rinse aid. → "Adding rinse aid", Page 24 There is detergent residue in the final rinse. Lid of detergent dispenser is blocked by dishware and will not open fully. 1. Arrange dishware in the upper rack so the tab collecting tray is not obstructed by dishware. → "Loading dishware", Page 28 Items of dishware are blocking the dispenser lid. 2. Do not place dishware or fragrance dispensers in the tab collecting tray. 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

Troubleshooting
en-us
51
Issue
Cause and troubleshooting
There are colored
deposits (yellow, or-
ange, brown) that
are ey to remove in-
side the appliance
(mainly at the bot-
tom).
The formation of films is due to ingredients of
food remnants and tap water (limescale), "soap-
like".
1.
Check the setting of the water softening sys-
tem.
"Setting the water softening system",
Page 23
2.
Add special salt.
3.
If you are using combined detergents (tabs),
activate the water softening system.
Follow the information on detergents.
Plastic parts inside
the appliance are
discolored.
Plastic parts inside the appliance may become
discolored over the life of the dishwasher.
Discoloration may come about and will not im-
pair functioning of the appliance.
Plastic parts are dis-
colored.
Dishwashing temperature is too low.
Select a program with a higher dishwashing
temperature.
Dishware has been precleaned too intensively.
Then the sensors choose a lighter cycle. Stub-
born remnants cannot be entirely removed.
Only remove large remnants of food and do not
pre-rinse dishware.
Adjust the sensitivity of the sensors.
"Sensors", Page 10
There are remov-
able streaks on
glasses, glassware
with a metallic ap-
pearance and silver-
ware.
Amount of rinse aid to be dispensed is set too
high.
Set the rinse aid system to a lower setting.
"Setting the amount of rinse aid", Page 25
No rinse aid has been added.
Add rinse aid.
"Adding rinse aid", Page 24
There is detergent residue in the final rinse. Lid of
detergent dispenser is blocked by dishware and
will not open fully.
1.
Arrange dishware in the upper rack so the tab
collecting tray is not obstructed by dishware.
"Loading dishware", Page 28
Items of dishware are blocking the dispenser
lid.
2.
Do not place dishware or fragrance dispensers
in the tab collecting tray.