Bosch WFMC5301UC Installation and Use & Care (all languages) - Page 10

Hose and cable lengths LeftĆhand connection a b RightĆhand connection e f d c h d g h a = 55.0 in. / 140 cm (approx.) b = 51.0 in. / 130 cm (approx.) c = 33.5 in. / 85 cm (approx.) d = 39.0 in. / 100 cm (max.) e = 69.0 in. / 175 cm (approx.) f = 34.6 in. / 88 cm (approx.) g = 55.0 in. / 140 cm (approx.) h = 24.0 in. / 60 cm (approx.) h = minimum drain point height Other hoses Available from appliance dealers: - Extended supply hose (approx. 96.1 in. /2.44 m). Electrical connection GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakĆ down, grounding will reduce the risk of electrical shock by providing a path of least resistance for the electric current. This appliance features a cord with an equipmentĆgrounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which has been properly installed and grounded in accordance with all local regulations and ordinances. d WARNING d Improper connection of the equipment grounding conductor may result in electric shock. Have the appliance checked by a qualified electrician or service technician if you are in doubt as to whether the washer has been properly grounded. Do not modify the plug provided with the appliance - if it will not fit in the outlet, have a proper outlet installed by a qualified electrician. on the washing machine (rating plate, see page 25). Connection specifications as well as the required fuses are stipulated on the appliance rating plate. Volts 110-120 Hertz 60 Amperes 15 Watts 1350 (max.) Make sure that: - the power plug fits into the socket. - the wire size is sufficient. - the grounding system is properly installed. The power cord may be replaced by an electrician only. Replacement power cords are available from Customer Service. d WARNING d To reduce the risk of fire or electrical shock, DO NOT use an extension cord or an adapter to connect the washing machine to the power supply. d WARNING d The washing machine must only be connected to an individual branch circuit via a socket which has been properly installed and grounded. The household electrical voltage must correspond to the voltage specification If an ground fault circuit breaker is to be used, only use types marked with the following symbol: 7. Only this symbol can guarantee compliance with all current regulations. Do not insert/remove the power plug with wet or damp hands. Touch the plug only when removing the plug from the socket. 10