Bose Acoustimass 10 Series II Owner's guide - Page 8
Selecting the locations for your speakers - speaker system
View all Bose Acoustimass 10 Series II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English Setting Up Figure 2 One suggested home theater layout A suggested home theater layout that conforms to the guidelines described above is shown in Figure 2. Twist the pairs of cube speakers so they describe angles that create room-filling sound patterns. You may choose to place the speakers differently, to take advantage of the sound characteristics of different rooms. Your speakers come with sufficient cable lengths to allow you to have the following distances between components: • Up to 20 feet (6 m) between the Acoustimass® module and the receiver. • Up to 20 feet (6 m) between the Acoustimass module and the front and center cube speakers. • Up to 50 feet (15 m) between the Acoustimass module and the surround speakers. Bose wall brackets and floor stands can extend your placement options. See "Accessories" on page 15. Note: Please follow wall bracket instructions carefully. Proper mounting will insure optimum performance from your system. Selecting the locations for your speakers The cables provided with your Acoustimass 10 Series II system vary in length, allowing a great deal of flexibility in speaker placement. Use the following placement suggestions as general guidelines. Choose convenient speaker locations that give you good sound. Left and right front cube speakers Figure 3 shows suggested ways to achieve an accurate left and right sound image. 6 October 22, 2001 AM19464_02_V.pdf