Bose Acoustimass 4 Owner's guide - Page 4

Unpack the system Everything you need to hook up your Acoustimass'-4 home theater system comes in one carton. Three (3) cube speakers One (1) Acoustimass bass module Six (6) cables, 20' each Four (4) adhesive-backed rubber feet To remove the system from the carton, first remove all packing materials. Carefully lift each component out and inspect it. If any parts appear damaged, do not attempt to use the system. Repack the system in its original carton and notify your authorized Bose dealer immediately. Note: If you are planning to use wall brackets to mount your cube speakers, we recommend that you read this guide thoroughly first, before you decide where to place the brackets. Five basic steps to setting up the system 1. Decide where you want each speaker. All three identicalcube speakers are magnetically shielded so you can place them very close to your video screen. In average rooms, the best video sound effect results when the left and right cube speakers are at least 6 feet apart (about 1.8 m). You may prefer as much as 15 feet (about 4.5 m) of separation. Place the center channel cube speaker directly on top of, above, or below your ID television (see Figure 2, placement "A" and 131Placing it right next to or even behind the screen may also give you the effect you want. Feel free to experiment. Refer to the Accessories section if you would like to mount your cube speakers on stands or wall/ceiling brackets. Left Cui:e aria/ B Center speaker placement options A Right cube array minimum 2 feet Bass module Figure 2