Bose Acoustimass 5 Series III Owner's guide - Page 8
Connecting the cube arrays to the Acoustimass, module - speakers black
View all Bose Acoustimass 5 Series III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English Setting Up 4. Connecting the cube arrays to the Acoustimass® module Select one pair of wires, and locate the terminal tab on the rear of the left cube array. 1. Just press the terminal tab on the back of the speaker to insert the marked wire into the red (+) terminal and the plain wire into the black (-) terminal (Figure 3). 2. Release the terminal tab and both wires will be held securely. 3. Repeat this process with the other pair of wires and the right cube array. Figure 3 Connecting a cube array Marked wire to red terminal Figure 4 Connecting cube arrays to the Acoustimass module CAUTION: Do not connect your amplifier or receiver directly to the cube arrays. Cube arrays must be connected directly to the Acoustimass module or damage will result. 4. Next, locate the terminals marked OUTPUTS TO CUBE SPEAKERS on the rear of the Acoustimass module (Figure 4). 5. Connect the other ends of the wires from the left cube array to the pair of terminals marked L. Make sure that the marked wire is connected to the positive (+) and the plain wire is connected to the negative (-) terminal. 6. Now, repeat step 5 for the right cube array, connecting its wires to the terminals marked R. From left cube speaker From right cube speaker To receiver or amplifier 6 October 23, 2001 AM196451_05_V.pdf