Bose Acoustimass 6 Series II Owner's guide - Page 10

Setting Up Your Acoustimass® 6 Speaker System Figure 8 System Connections Separate the wire pairs as you lay out the cable lengths. You may want to keep unextended lengths of cable joined, making them easier to hide. Refer to Figure 8 on for an overview of the completed connections. • Use the 20 foot (6 m) front speakers cable with three pairs of wires to connect the Acoustimass module to the center, left front, and right front cube speakers. • Use the 50 foot (15 m) surround speakers cable with two pairs of wires to connect the Acoustimass module to the left and right surround cube speakers. • Use the 20 foot (6 m) system input cable with five pairs of wires to connect the Acoustimass module to the outputs on the receiver. Separate these wires just enough to reach the connectors. Note: If you have already installed cable behind walls or under floors, or believe you need to splice the supplied cables for any other reason, inquire about the add-on connectors and extension cable available from Bose® Customer Service. Refer to page 17 for details on these accessories. Bose Customer Service telephone numbers are listed on the inside back cover. FRONT SPEAKE R 3+ RIGHT +3 FRONT SPEAKERS R L Front speakers cable SURROUND SPEAKERS R REAR L CENTER OUTPUTS TO CUBE SPEAKERS L C R LS RS LEFT CENTER RIGHT LEFT RIGHT SURROUND SURROUND INPUTS FROM RECEIVER OR AMPLIFIER L C R LS RS Surround speakers cable System input cable 10 October 29, 2001 AM25212_02_V.pdf