Bose Acoustimass 6 Series II Owner's guide - Page 15
Using your Dolby Digital AC-3 receiver - subwoofer
View all Bose Acoustimass 6 Series II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English Operating Your Acoustimass® 6 Speaker System Using your Dolby Digital (AC-3) receiver Your Acoustimass® 6 speakers are compatible with the output from Dolby Digital (AC-3) receivers. Take special care to set the channel output according to the specifications listed in the chart below. The Acoustimass speaker system is a full-range system and must be set as LARGE speakers on the Dolby Digital screen menu. An exception is the center speaker, which must be set as SMALL. Turn the subwoofer OFF and turn the LFE (low-frequency effects) ON. Receiver channel output Left and Right Front Center Left and Right Surround Subwoofer LFE (low-frequency effects) Proper setting LARGE SMALL LARGE OFF ON Follow the receiver owner's guide instructions for using the receiver test tone to verify your connections and to adjust the volume levels of the speakers. AM252172_02_V.pdf October 29, 2001 15