Bose Acoustimass 6 Series II Owner's guide - Page 16

Maintaining Your Acoustimass® 6 Speaker System Cleaning your speakers Wipe the cube speakers using a damp cloth. Do not use solvents or chemicals. Do not allow liquids to spill on or objects to drop into the Acoustimass® module or the speaker grilles. You may vacuum the grilles carefully; the drivers are directly behind the grille cloth. No other maintenance is needed. Troubleshooting If you have a problem with your Acoustimass 6 speaker system, turn off your sound source and try the solutions below. If you still have a problem, contact your Bose® dealer to arrange for service. To contact Bose directly, refer to the inside back cover of this guide. Problem System does not function at all. No sound No surround sound What to do • Make sure the power cord of the receiver is plugged into an operating AC wall outlet and the receiver is turned on. • Be sure to select a source at the receiver (video, CD, tuner). • Check the cube speaker and Acoustimass module connections. Turn on the receiver. • Check connections of external components to the receiver. • Increase the volume. • Disconnect any headphones. • If your surround sound receiver is Pro-Logic, be sure your receiver is connected to a stereo sound source (TV, VCR, laserdisc or DSS player) by an RCA stereo cable. If the receiver is connected directly to a stereo television, make sure that all other program sources (VCR, laserdisc or DSS player) are connected to the TV using RCA stereo cables as well. • If your surround sound receiver is Dolby Digital (AC-3), be sure the sound source (DSS, laserdisc or DVD player) is connected directly to your receiver as shown in the owner's guide. • On your TV, turn off enhanced surround sound, if available. Set your TV for stereo only. 16 October 29, 2001 AM25212_02_V.pdf