Bose Acoustimass Multimedia Owner's guide - Page 6

Cart;11.1

Get Bose Acoustimass Multimedia PDF manuals and user guides View all Bose Acoustimass Multimedia manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Connecting the Acoustimass multimedia speaker system Cube speakers to the bass module The supplied speaker cables have two wires, positive and negative. The plain wire is always negative (-). The wire with a stripe or a red collar is always positive (+). Always connect them to the corresponding terminals on the cube speakers and bass module. For each connection, push the terminal tab down and insert the appropriate wire into the exposed hole (Figure 5). Release the tab to secure the wire in place. 1. Connect the end of one speaker cable to the right cube speaker (Figure 6). 2. Connect the other end to the right (R) OUTPUTS terminal on the bass module (Figure 7). 3. Check the wires. They should be connected positive to positive and negative to negative. Do not let the exposed wires brush against each other. This could create a short circuit and damage your speaker system. 4. Repeat steps 1 through 3 to connect the left cube speaker to the bass module's left 0-1 OUTPUTS terrninal. CAUTION: Be sure to unplugallcomponent. before connecting the system. Figure 5 (-) Figure 6 • Figure 7 Cart;11.1 _J 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
Connecting
the
Acoustimass
multimedia
speaker
system
Cube
speakers
to
the
bass
module
The
supplied
speaker
cables
have
two
wires,
positive
and
negative.
The
plain
wire
is
always
negative
(-).
The
wire
with
a
stripe
or
a
red
collar
is
always
positive
(+).
Always
connect
them
to
the
corresponding
terminals
on
the
cube
speakers
and
bass
module.
For
each
connection,
push
the
terminal
tab
down
and
insert
the
appropriate
wire
into
the
exposed
hole
(Figure
5).
Release
the
tab
to
secure
the
wire
in
place.
1.
Connect
the
end
of
one
speaker
cable
to
the
right
cube
speaker
(Figure
6).
2.
Connect
the
other
end
to
the
right
(R)
OUT-
PUTS
terminal
on
the
bass
module
(Figure
7).
3.
Check
the
wires.
They
should
be
connected
positive
to
positive
and
negative
to
negative.
Do
not
let
the
exposed
wires
brush
against
each
other.
This
could
create
a
short
circuit
and
damage
your
speaker
system.
4.
Repeat
steps
1
through
3
to
connect
the
left
cube
speaker
to
the
bass
module's
left
0-1
OUTPUTS
terrninal.
(-)
Cart;11.1
_J
CAUTION:
Be
sure
to
unplug
all
component.
before
connecting
the
system.
Figure
5
Figure
6
•
Figure
7
6