Bose Acoustimass Multimedia Owner's guide - Page 8

Operating, Acoustimass, multimedia, speaker, system

Page 8 highlights

Operating the Acoustimass multimedia speaker system Powering the system The AC power cord is detachable. You must connect it to the bass module before the speaker system will operate. 1. Plug the small end of the power cord into the power jack on the bass module. 2. Plug the other end of the power cord into the wall outlet. 3. Turn on your computer or sound source. 4. Press the power switch on the back of your bass module to ON (I ). Adjusting the sound The acoustics of your listening room affect the sound quality of any speaker system. Upholstered furniture, wall-to-wall carpets, or heavy drapes can muffle the treble (high frequencies). Bare floors and walls and unupholstered furniture reflect the treble and may sound too shrill. Listening at close range (less than 4 feet from the cube speakers). such as when cube speakers are placed next to your computer monitor, may also cause the sound to be too shrill. Bass/Treble After listening to your speaker system, you may wish to adjust the sound. Use the bass and treble controls on the bass module (Figure 9). A small dot near each knob marks the recommended setting. Turn the control clockwise to increase, or counterclockwise to decrease, the treble or bass. -MOSE- Volume 0 Use the volume control on the bass module (Figure 9). A small dot near the knob marks the recom- mended setting. Turn the knob clockwise to increase, or counter- clockwise to decrease, the volume. You may also be able to control the volume on your computer or computer and CD-ROM combination from a control panel on your computer. • Note: You do not have to turn off your speaker system after you have connected it. The system remains in "stand by" mode when not in use. Figure 9 • Note: Using the volume controls in their maximum position may reduce the speaker system's maximum volume. Note: If you wish to control volume at the sound source, instead of the bass module, set the volume control o the bass module at maximum volume. Then make all other adjustments using the volume control on your sound source. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

Operating
the
Acoustimass
multimedia
speaker
system
Powering
the
system
The
AC
power
cord
is
detachable.
You
must
connect
it
to
the
bass
module
before
the
speaker
system
will
operate.
1.
Plug
the
small
end
of
the
power
cord
into
the
power
jack
on
the
bass
module.
2.
Plug
the
other
end
of
the
power
cord
into
the
wall
outlet.
3.
Turn
on
your
computer
or
sound
source.
4.
Press
the
power
switch
on
the
back
of
your
bass
module
to
ON
(I
).
Adjusting
the
sound
The
acoustics
of
your
listening
room
affect
the
sound
quality
of
any
speaker
system.
Uphol-
stered
furniture,
wall-to-wall
carpets,
or
heavy
drapes
can
muffle
the
treble
(high
frequencies).
Bare
floors
and
walls
and
unupholstered
furniture
reflect
the
treble
and
may
sound
too
shrill.
Listening
at
close
range
(less
than
4
feet
from
the
cube
speakers).
such
as
when
cube
speak-
ers
are
placed
next
to
your
computer
monitor,
may
also
cause
the sound
to
be
too
shrill.
Bass/Treble
After
listening
to
your
speaker
system,
you
may
wish
to
adjust
the
sound.
Use
the
bass
and
treble
controls
on
the
bass
module
(Figure
9).
A
small
dot
near
each
knob
marks
the
recommended
setting.
Turn
the
control
clockwise
to
increase,
or
counterclockwise
to
decrease,
the
treble
or
bass.
Volume
Use
the
volume
control
on
the
bass
module
(Figure
9).
A
small
dot
near
the
knob
marks
the
recom-
mended
setting.
Turn
the
knob
clockwise
to
increase,
or
counter-
clockwise
to
decrease,
the
volume.
You
may
also
be
able
to
control
the
volume
on
your
computer
or
computer
and
CD-ROM
combination
from
a
control
panel
on
your
computer.
-MOSE
-
0
Note:
You
do
not
have
to
turn
off
your
speaker
system
after
you
have
connected
it.
The
system
remains
in
"stand
by"
mode
when
not
in
use.
Figure
9
Note:
Using
the
volume
controls
in
their
maximum
position
may
reduce
the
speaker
system's
maximum
volume.
Note:
If
you
wish
to
control
volume
at
the
sound
source,
instead
of
the
bass
module,
set
the
volume
control
o
the
bass
module
at
maximum
volume.
Then
make
all
other
adjustments
using
the
volume
control
on
your
sound
source.
8