Bose Companion 5 Owner's guide - Page 16

Operation - software

Page 16 highlights

OPERATION OPERATION System modes Figure 13 System controls and mode indicator Français Español English There are three system modes. Each system mode is identified by the color of the mode indicator on the control pod (Figure 13): • Muted (Amber): The system speakers are silenced. You hear no audio from the computer or any connected source. This mode is automatically selected when you connect headphones to the control pod. • Active (Green): You hear the active sound source from the system speakers. The position of the volume control ring sets the volume level. • Standby (Red): The system is in an energy-saving mode. When both the USB connection from your computer and the input signal of a connected audio source are inactive for several minutes, the system mutes the speakers and switches to Standby. The system returns to the Muted mode when the USB connection becomes active again. Touch the top center of the control pod to switch between the Muted and Active mode, except when headphones are connected. Plugging in headphones always puts the system in Muted Mode until they are removed. Mode switch (touch-sensitive) Volume control ring Mode indicator • Amber = Muted mode • Green = Active mode • Red = Standby mode IMPORTANT! • The Companion® 5 multimedia speaker system is designed to perform at its best without any additional audio effects. Make sure you disable any audio effects settings and close any effects applications running on your computer. • Make sure the settings in your software application are correct for 5.1 surround sound. Controlling the volume The volume control ring on the control pod (Figure 13) is the master volume control for any audio coming from your computer or a device connected to the input jack. Rotate the ring clockwise to increase the volume or counterclockwise to decrease it. To set the volume level To properly set the volume level, you need to adjust both the volume level of the source (your PC or a connected source) and the Companion 5 system: 1. Set the Companion 5 system volume to minimum. 2. Set the source volume near maximum. 3. Start playing music. 4. Slowly increase the volume on the Companion 5 system control pod until the sound reaches a comfortable level. To mute the system To silence the system, touch the mode switch on the control pod (indicator glows Amber). Touch it again to unmute (indicator glows Green). Note: The system output may be reduced by an internal protection feature if you play music at full volume for a long period of time. 16 06.Operation.fm 10/08

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21

16
06.Operation.fm
10/08
English
Français
Español
O
PERATION
O
PERATION
System modes
There are three system modes. Each system mode is identified by the color of the mode indi-
cator on the control pod (Figure 13):
Muted (Amber):
The system speakers are silenced. You hear no audio from the computer
or any connected source. This mode is automatically selected when you connect head-
phones to the control pod.
Active (Green):
You hear the active sound source from the system speakers. The position
of the volume control ring sets the volume level.
Standby (Red):
The system is in an energy-saving mode. When both the USB connection
from your computer and the input signal of a connected audio source are inactive for sev-
eral minutes, the system mutes the speakers and switches to Standby. The system returns
to the Muted mode when the USB connection becomes active again.
Touch the top center of the control pod to switch between the Muted and Active mode,
except when headphones are connected. Plugging in headphones always puts the system in
Muted Mode until they are removed.
Figure 13
System controls and mode
indicator
IMPORTANT!
• The Companion
®
5 multimedia speaker system is designed to perform at its best
without any additional audio effects. Make sure you disable any audio effects
settings and close any effects applications running on your computer.
• Make sure the settings in your software application are correct for 5.1 surround
sound.
Controlling the volume
The volume control ring on the control pod (Figure 13) is the master volume control for any
audio coming from your computer or a device connected to the input jack. Rotate the ring
clockwise to increase the volume or counterclockwise to decrease it.
To set the volume level
To properly set the volume level, you need to adjust both the volume level of the source (your
PC or a connected source) and the Companion 5 system:
1.
Set the Companion 5 system volume to minimum.
2.
Set the source volume near maximum.
3.
Start playing music.
4.
Slowly increase the volume on the Companion 5 system control pod until the sound
reaches a comfortable level.
To mute the system
To silence the system, touch the mode switch on the control pod (indicator glows Amber).
Touch it again to unmute (indicator glows Green).
Note:
The system output may be reduced by an internal protection feature if you play music at
full volume for a long period of time.
Mode switch
(touch-sensitive)
Mode indicator
Amber = Muted mode
Green = Active mode
Red = Standby mode
Volume control ring