Bose L1 Pro32 Portable Line Array With Sub2 Powered Bass Module Multilingual O - Page 9

PRO.BOSE.COM Connecting Sources Channel 1 & 2 Controls Channel 1 and 2 are for use with microphones, guitars, keyboards, or other instruments. The channel inputs are suitable for a wide q range of input types and will have the proper gain staging to minimize noise when the channel volume is set for the desired output level. 1. Connect your sound source to the Channel Input with the appropriate cable. 2. Apply a ToneMatch preset-to optimize the sound of your microphone or instrument-by pressing the Channel ToneMatch Button until the LED for your chosen preset is illuminated. Use MIC for microphones and use INST for acoustic guitars and other instruments. Use OFF if you do not want to apply a preset. Note: Use the L1 Mix app to choose custom presets from the ToneMatch library. The corresponding LED will illuminate green when a custom preset is selected. 3. Press the Channel Parameter Control to choose a parameter to modify. The parameter name will illuminate white while it is selected. 4. Rotate the Channel Parameter Control to adjust the level of the selected parameter. The parameter LED will indicate the level of the selected parameter. Note: While Reverb is selected, press and hold the control for two seconds to mute the reverb. While reverb is muted, Reverb will flash white. To unmute reverb, press and hold for two seconds while Reverb is selected. Reverb mute will reset when the L1 Pro is powered off. Setup w INST e r Owner's Guide • L1 Pro32 Portable Line Array English • 9