Bose SoundLink Bluetooth Mobile Speaker II Owner's guide - Page 14

Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 OPERATION Control buttons The control buttons are located on the top of the speaker. • Press to turn the speaker on or off. • Press and hold to check the battery level (see "Checking the battery" on page 18). • Press to select the source connected to the (AUX) input. See "Adding another source" on page 16. • Press to select the Bluetooth® source. The speaker attempts to connect to the last paired device. See "Pairing with Bluetooth® devices." • Press and hold for 3 seconds to set the speaker to discoverable mode and allow pairing with another Bluetooth® device. • When a device is connected, press to disconnect the device. The speaker then waits for a paired device to connect. • While the Bluetooth® source is selected, if no device connects within 30 minutes, the speaker turns itself off. Tab 4, 12 Tab 3, 11 Tab2, 10 English • Mutes sound from the speaker. • Plus (+) increases volume, minus (-) decreases volume. The front panel source indicator flashes once for each button press. The indicator flashes twice when maximum or minimum volume is reached. Pairing with Bluetooth® devices Pairing occurs when two Bluetooth devices communicate with each other and establish a connection. A record of information about this connection is then stored in the memory of each device. Once you pair a device with the SoundLink® Mobile speaker II, you should not have to pair it again. The SoundLink® Mobile speaker II can pair with up to six Bluetooth devices. However, it can only connect to, and play audio from one device at a time. 14