Bose SoundLink Bluetooth Mobile Speaker II Owner's guide - Page 17
To add a source - updates
View all Bose SoundLink Bluetooth Mobile Speaker II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English Tab 2, 10 Tab 3, 11 Tab4, 12 To add a source: 1. Plug the cable from the audio device into the AUX ( ) connector on the back of the SoundLink® Mobile speaker II. Tab 5, 13 Tab 6, 14 Tab2, 7, 15 Tab 8, 16 OPERATION 2. Press the AUX button. 3. Adjust the volume on the connected device to near maximum, then use the SoundLink® Mobile speaker II volume buttons to adjust the level. Note: If a connected device stops playing audio for 30 minutes, the speaker automatically turns off. Note: The SERVICE connector on the rear of the speaker is for Bose® software updates only and will not play audio from any connected device. 17
17
O
PERATION
Tab 6, 14
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 8, 16
Tab2, 7, 15
To add a source:
1.
Plug the cable from the audio device into
the AUX (
) connector on the back of the
SoundLink
®
Mobile speaker II.
2.
Press the AUX button.
3.
Adjust the volume on the connected
device to
near
maximum, then use the
SoundLink
®
Mobile speaker II volume
buttons to adjust the level.
Note:
If a connected device stops playing audio for
30 minutes, the speaker automatically turns off.
Note:
The
SERVICE
connector on the rear of the
speaker is for Bose
®
software updates only and will
not play audio from any connected device.